- Stored grain can be damaged by insect pests and fungi inhabiting the bins, grain, and storage facilities.
- Investing time in cleaning, repairing and sanitizing the bins will prevent, or at least minimize, the risk of serious issues later on.
- Several products are available as empty-bin, mass grain or top-dress treatments to protect grain from insect damage.
Insects and mold can cause significant financial losses in stored grain, due to destroyed product and dockage. Prevention always beats cure with stored grain insects, and you really only have one chance to prepare the bin properly for success. Investing a little time before harvest to clean, repair, sanitize, and protect the bin will prevent a host of problems later that can be much more difficult to fix.
The following is a simple checklist to minimize the risk from insect infestation and assure maximum quality of stored grain:
- Do NOT mix new grain with old grain. The old grain may serve as a source of insect infestation for the new grain.
- Thoroughly clean all old grain, webbing, and debris from the bin prior to harvest. Clean under the aeration floor if possible.
- Repair or seal all seams, holes, or cracks using an approved patch material or sealant.
- Check the mechanical integrity and performance of fans, ducts, augers, and the aeration or drying floor.
- Apply insecticides to interior bin surfaces using an approved empty-bin insecticide. Allow all interior bin surfaces to dry completely before loading grain in the bin. Bins with inaccessible interior components may need to be fumigated, which requires additional pesticide certifications, special equipment, and extreme safety precautions.
- Remove insect habitat and food sources right outside the bin. Mow grass and weeds around bins, clean and remove dead vegetation, and consider the use of a labeled residual herbicide to create a vegetation free strip around each bin. Clean up all spilled grain and keep bin sites clean.
- Prepare and calibrate application equipment used to treat the grain with protectant products.
- Handle grain with care during harvest and subsequent movement. Adjust and operate combines to minimize grain damage. Grain kept in good physical condition is less likely to become infested.
- Store grain at proper moisture. Moisture levels from 18-20% accelerate spoilage and are more likely to be damaged by insects. In addition, storage at elevated moisture allows fungi to remain active, and if they are mycotoxin-producing fungi (e.g. Fusarium) they may continue to grow and produce mycotoxins. Ideally, grain should be stored at 15% moisture or less.
- Store grain at proper temperature. Infestation takes place at air temperatures above 60°F, and insect activity can be sustained above 50° F. Cooling the grain after harvest effectively reduces the risk of insect damage and fungal/mycotoxin contamination/development. The greatest risk of infestation occurs when temperatures are warm (April – September).
- Apply a grain protectant as a mass treatment. Treat the grain mass while it enters the bin with insecticides labeled for the grain being stored and applied at appropriate rates. The upper and lower layers may be treated while the bin is being filled. If grain will be stored for several months or more, the entire grain mass may be treated. A number of products including the actives pirimiphos-methyl, deltamethrin, silicon dioxide, pyrethrin, Methoprene, diatomaceous earth and Spinosad are labeled as grain protectants. Read the label to make sure the actives have activity against the insects you are trying to target.
- Apply a grain protectant as a top dress/ surface treatment. This may be effective to prevent insects from entering the top of the grain mass although it will not control an established infestation within the bulk of grain. A few of the actives labeled for mass treatments are also labeled for surface treatments. These include pirimiphos-methyl, pyrethrin, Methoprene, diatomaceous earth and Spinosad. In addition, Bt insecticides (Dipel and Biobit) are labeled for surface treatments. Insect spectrum varies with the product so make sure to read label for target pests.
Contact your FS Crop Specialist
Your FS Crop Specialist is here to help you with your nutrient management plans.
Learn more
Related Items
The soybean cyst nematode (SCN), Heterodera glycines, causes greater losses than any other soybean pathogen in the U.S with annual yield losses estimated at more than $1 billion. Yield losses can vary from year to year and are influenced by soybean variety, weather conditions, soil type and other plant stressors.
Read the full story
Key decisions made before wheat planting have a large impact on the success of the season-long pest management program. This article discusses key decisions that will have season long implications.
Read the full story
There are several ear malformations that may be observed in corn as the season winds down. This article discusses some common issues and potential causes.
Read the full story